|
|
Arrow
Nocks
Borrowed
from archery, arrow nocks provide a notched end for kite spars. When
attaching nocks to epoxy tubing, glue into place using nock inserts.
Assorted colors available.
|
| |
|
|
|
HT-NOCKS
A
notched end cap for AFC and Avia spars without the need for nock inserts. |
| |
|
|
|
Nock
Inserts and Insert Sleeves
Nock
Inserts reinforce nocks at the ends of epoxy tubes. Insert sleeves
reinforce ends of epoxy tubing where nocks are not required. Both
types of inserts can be glued inside epoxy spars. |
| |
|
|
|
|
| |
Elastic
Shock Cord
Connect
the kite sail to the nock at the wing tips.$.50/yd
|
|
|
Epoxy
Ferrules
Used
to connect epoxy tubing to make longer spar lengths. Half the ferrule
is glued to the inside of a piece of tubing, and the other half is
left free to accept another piece of tubing. Allows for easy break
down for transport. |
| |
|
|
|
Metal
Ferrules
Used to extend fiberglass
or hardwood spars into longer lengths, and allow easy breakdown for
transport. Half the ferrule is glued to one end of the spar and the
other half is left free to accept another spar. |
| |
|
|
|
Vinyl
End Caps
Fit
over the ends of spar tips to prevent wear of fabric from spar ends.
|
|
BACK
TO TOP
|
|
